THE WORKSHED BLOG

⚡Guitar Of The Day⚡ This 1960's Watkins Rapier 22 had some restoration and a full service + setup at the Fretbuzz Workshed. Ultimate...

Getting my Nu-Metal on with this @fieldykorn Ibanez K5 @korn_official Ibanez 🤘🏻 Full of dust and ready for the Fretbuzz Service + Setup...

This Epiphone had a fret level, handcrafted bone nut, bridge saddle reshaped and lowered, plus a setup with @rotosound_uk JK 12-52"...

This '89 Fender Strat Plus had some serious pitted frets and required a fret level, crown and dress. Wiring was wrong with a .1uf cap,...

Refret + Fretboard repair on this 1970's Antoria 698M. The frets were extremely pitted with the fretboard scalloped due to extensive...

This 1976 Fender Telecaster had the works 🔥 Full rewire vintage Tele style with new pots/switch + Russian PIO Cap. Fret Level, Crown,...

Really fun Partscaster project based on Izzy Mitchells guitar he uses with @earthlessrips rig 🔥🔥🔥 As always with Partscaster, not all...

⚡ Fretbuzz Service + Setup⚡ This 1992 MIJ Squier Strat had a well needed Spa day at the Fretbuzz Workshed, with full deep clean and...

Stainless Steel Refret on this 2009 Gordon Smith GS1. The fretboard edges had huge chips where the frets were placed, I've sanded this...

This EMG equipped Fender Telecaster had a setup in C# going up gauges from 9's to 12's, neck relief adjusted and nut cut to fit that...

Check that finish 👀🔥 This HSS American Ultra Fender Stratocaster had some meat off of the frets for a choke-free low action! Levelled,...

Gearing up for another successful and busy year at the Fretbuzz Workshed. It has to be said that I am completely blown away by everyone's...

1969 Gibson B-15 with battle scars to boot! There have been some questionable repairs over the years, specifically the headstock break,...

Fender 'Floral Blue' Precision Bass '54 had a Fretbuzz Service + Setup 🔥 Years of badly placed shims and a slight warp from the 16th...

This old workhorse Yamaha Pacifica is now spick and span, ready to gig again! Fender 'Tim Shaw' Humbucker installed, new Alpha 250k pots,...

This Schecter had serious fret buzz due to a low nut and reduced neck relief - replaced with a hand cut block of Tusq Graphite. Full...

This 1970's Shaftesbury made for @rosemorrismusic had a full spa day at the Workshed - Green frets are no more. Faulty pots and Jack...

Fender 'American Professional II' Telecaster had the Fretbuzz Workshed treatment 🔥⚡ What's not to love, a Telecaster done RIGHT. Rolled...

Full assembly and setup of a Gilmour Modded Partscaster with 7 way switching. Started life as an Indonesian Squier, which wasn't too bad...

Gibson Les Paul standard had a Spa day at the Workshed with a Fretbuzz Service + Setup, push/pull PCB gubbins plumbed back in to replace...