THE WORKSHED BLOG

A couple of great EVH Wolfgang Standards in recently! Absolutely love the baked maple neck on this silver beast 🔥 Main issue with EVH...

Epiphone Les Paul Prophecy in the Workshed 🏚️🎸🔥 Fishman Fluence as stock, brushed chrome hardware, Ebony board 😍 everything is great,...

The Ibanez Wizard 🧙‍♂️ has been summoned! This S520 had a trip to the Workshed due to dreaded fret-buzz, there was zero neck relief and...

⚡STRATURDAY⚡ This 1991 'Midnight Blue' Fender Strat Plus visited the Workshed for a Fret Level, Service + Setup 🔥 Couple of high frets...

⚡ Fretbuzz Service + Setup⚡ Oddball 'Squier MB4' had an issue with the Pickup blend pot, some dry solder joints and one hell of a thirsty...

Full Rewire, Fret Dress + Setup on this '97 Gordon Smith SG2 ⚡ Awesome Manchester made GS brought to the Workshed for a well needed...

Ibanez Jem had a Stainless Steel Refret 🔥🔥🔥 If you've not played SS Frets, I highly recommend trying them out, especially if you're a...

Sometimes the job that seems like it should be the simplest, turns out to be a huge challenge! I recently had the pleasure of working on...

This Fender Telecaster had a Fret Level, Service + Setup ⚡ The most pitted frets I've seen in a while! I've levelled, crowned and dressed...

This awesome '80s Fender Precision Bass had some fretwork to remove squared-off crowns and pitted frets, I've serviced the pots and...

Crash, bang, wallop, what a neck break - FIXED! 🎸⚡🤘 The Les Paul had a really clean break, and it's handy that both necks were Satin...

⚡ Fretbuzz Service + Setup ⚡ Different workbench today as I'm down at Hiwatt! This @fender American Pro II series had a Setup after...

⚡Fretbuzz Service + Setup⚡ Gibson J-30 had a new bridge saddle, fretboard conditioning and polish, reverted back from a setup with...

Busy Friday at The Workshed 🎸⚡✌️ This 2001 Gibson LP Double Cut had a Fret Level, crown and dress and fretboard conditioning. I've...

My hometown hero Guitar Luthier 'Pete Back' made some special Guitars for some very special Musicians back in the 80's. I've loved being...

Back again with another 7 string chug machine, also with Fishman Fluence! The pots and switch were subject to a blowtorch by the looks of...

This Cort 7 String Multiscale had a handcrafted Graphtec Nut and Fretbuzz Service + Setup in G# The original plastic nut was too low and...

⚡Tele Tuesday⚡ This Fender 'Baja' Telecaster had the Fretbuzz Service + Setup treatment, plus shielding of the cavity. Ain't she just a...

It's Straturday! 🎸⚡ 2004 Fender Strat needed some attention to the neck heel and a fret level. I've always been a three-sided file dude...

Epiphone Special II needed a new Toggle Switch and some fretwork. Pic #2 shows the extremely low fret which had to be replaced before...